Merchandise Description

A HDPE compression reducer fitting is utilized to be a part of 2 lengths of distinct-size metric HDPE pipe.
With a size variety from 25/20 mm to 110/ninety mm, PP compression reducer fittings are suited for drinking water and other related fluids, with pressures up to 16 bar. Poly pipe Reducer compression fittings are produced from high quality PP-B content that is resistant to etching by numerous chemical substances, and to UV rays, and are suitable for out of doors use.
 
SUNPLAST HDPE compression fittings / PP compression fittings are are produced in compliance with the requirements of expectations EN 712/713/715/911 ISO 3501/3503/3458/3459.The fittings can be set up on HDPE pipes which are in compliance with specifications ISO 11922 DIN 8072/8074 UNE 53131. The threaded versions are produced in compliance with normal ISO 7 DIN 2999.
 
 
 
 
PP compression reducer are consisted of 5 palstic equipment:

 
A lot more brief information as below:

 
 
Solution Technical specs   
HDPE/PP compression reducer fittings can be made sizing from 25×20mm to 110×90mm. The size twenty-63mm with a stress of PN16, and 75-110mm pressurized in PN10.   

HDPE Compression Fittings CZPT Can Offer you
As a integrated & seasoned producer & supplier in China, CZPT carries an comprehensive variety of HDPE compression fittings in a diameter sizing from 20mm to 110mm, and all customers can find the ideal solution of fittings for their pipeline programs in SUNPLAST
 
Our poly pipe compression fittings contain:
→ HDPE Compression Coupler/Coupling,HDPE Compression Reducer Fittings, HDPE Compression Female/Male Adaptor Fittings
→ HDPE Compression 90 Degree Elbow,HDPE Compression Woman/Male Elbow Fittings
→ HDPE Compression Equivalent Tee, HDPE Compression Minimizing Tee, HDPE Compression Female/Male Tee Fittings
→ HDPE Compression Flange Adaptor
→ HDPE Compression Stop Cap
 

Advantages Of PP Compression fittings
By comparison of the other fittings, poly pipe compression fittings offer fantastic actual physical and overall performance positive aspects:
 
By comparison of the other HDPE fittings, HDPE electrofusion fittings repute a lot more positive aspects:
* Quickly assemble & disassemble, Easy installation:No welding, No particular resources essential, very easily assembling & disassembling, these can make PP compression fittings more & more commonly utilized, specifically for irrigation systems.
* decrease set up fees & labor fees: HDPE compression fittings is a fittings use a mechanical link method, rapidly to put in & significantly less set up staff will be necessary.
* Excellent watertight: The special design & NBR “O” rings ensure Poly compression fittings a ideal watertight for long time use.
 
 
FAQS

 
* How to connect the PP compression fittings?
A: PP compression fittings are quite easy to put in, which entails the following methods:
• Preparing the pipe, eliminating the burrs and beveling the edge of pipe. The outer floor of the pipe should be free of charge from imperfections or indentations exactly where the human body of the fittings make speak to with the pipe
• Unscrewing the blue nut and set it into the pipe followed by the white clamping ring. Make sure the clamping ring is in the right placement, with the bigger mouth outwards to the edge of pipe.
• Urgent the pipe axially into the poly compression fittings, till it contact the inner gap of fittings.
• Tightening the ring nuts by hand, and then use the torque wrench offered, till it is restricted.
 
* What is the most widespread lead to of leaking of HDPE compression fittings?
A: It is critical to stay away from more than-tightening the nut or else the integrity of the poly compression fitting will be compromised by the extreme drive. If the nut is overtightened the ferrule will deform improperly creating the joint to fall short. Without a doubt, overtightening is the most common cause of leaks in PP compression fittings.
 
* How a lot burst stress can Poly compression fitting take?
A: SUNPLAST PP compression fittings are developed for the max.standard stress 16 bars at 20ºC, and the burst stress reaches 35 bars.
 
* Can CZPT HDPE compression fittings exposed beneath sunshine?
A: Yes, all HDPE pipe compression fittings are UV-resistant, and can be used out of doors.
 
* HDPE fusion fittings & HDPE compression fittings, which 1 is much better?
A: It is challenging to say. HDPE compression fittings are only be attainable for modest diameter pipe till 110mm, whilst HDPE fusion fittings are accessible for all measurements.
 
By comparison to HDPE fusion fittings, Poly pipe compression fittings are straightforward set up, much less cost, and are specially beneficial in installations that may call for occasional disassembly or partial removal for servicing and so on., because these joints can be damaged and remade without impacting the integrity of the joint.
 
The downside is PP compression fittings are not as robust as fusion fittings.
 
 
Why Pick Us?
 Rich knowledge on producing HDPE fittings more than twenty a long time, we are an professional in this business.
 Full product range obtainable, you will constantly find the right remedy here.
 Strong after-sale expression supports to supply skilled CZPT for installation.
 By using top quality uncooked material, with lengthy warranty time on good quality.
 Short direct time to satisfy your urgent require ask for.
 Quick reply for your inquiries inside of twelve hours.
 OEM support accessible to help a good sale in customers’ market place.

 
Contact Us
If you have any demands on PP compression fittings, or any question on our fittings, make sure you speak to us freely. CZPT has nicely skilled staff who are obtainable to deal with your wants and supply specialized help to all sectors when essential.
 

###

###

###

###

###

###

###

###

###

###

###

###

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.

editor by czh 2023-01-02